In fact, my suggestion is to use the official firmware, because there are still some issues that need to be dealt with. Please pay attention to the follow-up official release.
Of course, you can also refer to WIKI: `https://wiki.t-firefly.com/en/ROC-RK3568-PC/` to package rockchip format firmware, which contains instructions on how to flash the firmware to emmc/SD.
Last edited by balbes150 on 2021-8-19 22:42 Editor
I don't need the official Firefly Ubuntu version :) .
I was just testing the build system to get the kernel and u-boot sources. I am working on adding Armbian and Libreelec support for p2\m2.
By the way, the versions that I collected from the official sources work (the system starts), but there are errors in the ROOTFS archives (in the UART console, I see that some of the services are not working, they do not start), so there is no full-fledged launch of the entire system.
Hi,
Try the following steps:
First，download rk356x-recovery-arm64.cpio.gz, replace `rk356x/device/rockchip/rockimg/rk356x-recovery-arm64.cpio.gz`.
After that,pack the new firmware as you did before.
./build.sh rawimg
There is an error on the documentation page for rk3568
https://wiki.t-firefly.com/en/RO ... mpile-configuration
not correct
./build.sh rk3568-firefly-roc-pc_ubuntu.mk
correct
./build.sh firefly-rk3568-roc-pc_ubuntu.mk
Of course, you can also refer to WIKI: `https://wiki.t-firefly.com/en/ROC-RK3568-PC/` to package rockchip format firmware, which contains instructions on how to flash the firmware to emmc/SD.
Thank you for your reminder, the error has been fixed.
https://bbs.stationpc.com/thread-184-1-1.html
I don't need the official Firefly Ubuntu version :) .
I was just testing the build system to get the kernel and u-boot sources. I am working on adding Armbian and Libreelec support for p2\m2.
By the way, the versions that I collected from the official sources work (the system starts), but there are errors in the ROOTFS archives (in the UART console, I see that some of the services are not working, they do not start), so there is no full-fledged launch of the entire system.
Hi,
Try the following steps:
First，download rk356x-recovery-arm64.cpio.gz, replace `rk356x/device/rockchip/rockimg/rk356x-recovery-arm64.cpio.gz`.
After that,pack the new firmware as you did before.
https://drive.google.com/file/d/ ... xc/view?usp=sharing
For RAW format firmware: https://bbs.stationpc.com/thread-184-1-1.html
For rockchip format firmware, choose `SD Boot`: https://wiki.t-firefly.com/en/RO ... de_firmware_sd.html